How To Add An Electrical Outlet Above An Existing Outlet
How To Add An Electrical Outlet Above An Existing Outlet. The position (on or off) of the switch turns the light on or off. Purchase the outlet and wires from a hardware or home improvement store and connect the wires to the receptacle.
The existing outlet is going to be nailed to a stud, so make sure that when you decide the height of your new outlet you put it about an inch or so away from the stud that the existing box is attached to. Make sure the cable sheath remains secured inside the box. My question is, exactly how do i connect the wiring between existing and new outlet?
Table of Contents
Now You Can See That To Attempt To Add An Outlet Or A Receptacle From This Switch Box Will Not Work In This Particular Situation.
The existing outlet appears to be in the middle of a circuit as i can see both an incoming and outgoing wire connected to it. Inside the electrical cable, there are 3 conductor wires, typically. Attach the neutral and hot wires to the receptacle.
This Video Explains How To Do Just That.
Connect the ground wire to the receptacle. Install the outlet receptacle at the new end. How easy is it to install an electrical outlet?
Attach The Receptacle To The Box.
Simply insert the end of the tester into an outlet, lamp socket, or hold the end of the tester against the wire you wish to test. The electrical end of the task is very simple; Bare wire to the green grounding screw.
The Existing Outlet Is Going To Be Nailed To A Stud, So Make Sure That When You Decide The Height Of Your New Outlet You Put It About An Inch Or So Away From The Stud That The Existing Box Is Attached To.
Attach pigtail wires to circuit wires. Of new cable in each box. It is running the wire that is the difficult part of the job.
Very Handy And Easy To Use.
The bare copper wire connects to the green screw. Wire the new electrical outlet. Attach the white wire to the chrome terminal across from the one to which you attached the black wire.